View H8711-10_1246895.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY
H8711, H8711-10
PATENT
4 mm x 4 mm Multianode, High Speed Response, Low Cross-talk 30 mm Square, Bialkali Photocathode, 12-stage, Head-on Type
GENERAL
Parameter Spectral Response Peak Wavelength Photocathode Window Material Dynode Structure Number of Stages Material Minimum Effective Area Description/Value 300 to 650 420 Bialkali 18.1 x 18.1 Borosilicate glass Metal channel dynode 12 4.2 x 4.2 (center) Approx. 50 -30 to +50 -30 to +50 Unit nm nm -- mm -- -- -- mm g C C
Anode Size Weight Operating Ambient Temperature Storage Temperature
MAXIMUM RATINGS (Absolute Maximum Values)
Parameter Supply Voltage Between Anode and Cathode Average Anode Output Current in Total Value 1000 0.014* Unit V mA
* The maximum average anode current is defined as 5 % of divider current when standard high voltage is applied.
CHARACTERISTICS (at 25 C)
Cathode Sensitivity Anode Sensitivity Gain Anode Dark Current per Channel (after 30 min storage in darkness) Anode Dark Current in Total (after 30 min storage in darkness) Anode Pulse Rise Time Time Response Electron Transit Time per Channel Transit Time Spread (FWHM) Pulse Linearity per Channel (5 % deviation) Cross-talk (4 mm x 4 mm Aperture) Uniformity Between Each Anode Parameter Luminous (2856 K) Blue Sensitivity Index (CS 5-58) Luminous (2856 K) Min. 60 6.5 80 (20) -- -- -- -- -- -- -- -- -- Typ. 80 8.5 280 (70) 3.5 x 106 (0.9 x 106) 0.8 (0.4) 12 (6) 0.83 10.9 0.3 1 (3) 1 1: 3 Max. -- -- -- -- -- 60 (30) -- -- -- -- -- 1: 5 Unit A/lm -- A/lm -- nA nA ns ns ns mA % --
NOTE: Anode characteristics are measured with the voltage distribution ratio shown below. ( ): Measured with the special voltage distribution ratio (Tapered Divider) shown below.
VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE
Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 H8711 2 2 2 1 1 H8711-10 (Tapered Divider) 2.4 2.4 2.4 1 1 Supply Voltage: 800 V, K: Cathode, Dy: Dynode, P: Anode ... 1 ... 1 1 ... 1 Dy9 1 1 Dy10 1 1 Dy11 Dy12 P 1 1 1.2 2.4
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2003 Hamamatsu Photonics K.K.
MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711, H8711-10
Figure 1: Typical Spectral Response
TPMHB0266EA
Figure 2: Typical Gain and Anode Dark Current per Channel
108
TPMHB0690EA
100 CATHODE RADIANT SENSITIVITY 10
104
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
107
103
106 QUANTUM EFFICIENCY GAIN 105
7 H8
11
102
0
1
GAIN
H
1 87
1 1-
101
104
H 11 87
100
-1 11 0
103 0.1 102
7 H8
10-1
ANODE DARK CURRENT PER CHANNEL
10-2
0.01 100
200
300
400
500
600
700
800
900
101 400
600
800
10-3 1000
WAVELENGTH (nm)
SUPPLY VOLTAGE (V)
Figure 3: Typical Time Response
TPMHB0331EA
Figure 4: Typical T.T.S. Characteristic
TPMHB0314EB
104
SUPPLY VOLTAGE= - 800 V FWHM= 310 ps FWTM= 631 ps
RELATIVE COUNTS
103
(2 mV/div.)
SUPPLY VOLTAGE = -800 V RISE TIME = 835 ps FALL TIME = 2047 ps WIDTH = 1658 ps RL = 50
102
101
100
TIME (2 ns/div.)
TIME (0.5 ns/div.)
ANODE DARK CURRENT (nA)
Figure 5: Pulse Linearity per Channel
10
TPMHB0691EA
10
TPMHB0692EA
PULSE WIDTH= 50 ns REPETITION= 1 kHz SUPPLY VOLTAGE= -800 V
PULSE WIDTH= 50 ns REPETITION= 1 kHz SUPPLY VOLTAGE= -800 V
DEVIATION (%)
Divider Ratio 2:2:2 :1::1:1:1
DEVIATION (%)
0
0 Divider Ratio 2.4 : 2.4 : 2.4 : 1 : : 1 : 1.2 : 2.4
-10
-10
-20
-20
10-2
10-1
100
101
10-2
10-1
100
101
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
H8711
H8711-10
Figure 6: Anode Uniformity (Example) 92 62 64 79 73 52 53 81 76 50 51 81 90 69 72 100
Figure 7: Anode Cross-talk (Example) 0.1 0.5 0.1 * 0.8 100 0.3 * 0.1 0.3 0.1 * * * * *
Supply Voltage: 800 V Light Source: Tungsten Lamp (uniform DC light) Full Illumination
Supply Voltage: 800 V Light Source: Tungsten Lamp (uniform DC light) Spot Illumination: 4 mm x 4 mm
MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711, H8711-10
Figure 8: Dimensional Outline and Circuit Diagram (Unit: mm)
9.3 8.7 0.3
4 3 2 1
POM CASE 4- 0.3 GUIDE MARKS 0.3 INSULATING TAPE DIVIDER ASSEMBLY 2.54 7.62
DY
12.7
GND -HV
4-SCREWS (M2)
30 0.5
25.7
18.1
P1
P8
8.7
9.3
P9
P16
2.54
16
15
14
13
5.08
GND
4.5 18.1 25.7
GUIDE MARK 3 2
4.5
1 MAX. 45 1
3.2 3.7
GND DY12 OUTPUT
2.54 2.54 x 7=17.78
THROUGH HOLE (NO CONNECTION) -HV INPUT NOTE 2 -HV TERMINAL PINS ( 0.46) ; BBL-TYPE, SAMTEC NOTE 3 DY12 OUTPUT TERMINAL PINS ( 0.46) ; BBL-102, SAMTEC * Suitable sockets for all terminal pins are attached. NOTE 1 The suitable socket for anode output terminal pins is "SD-108-T-22 (SAMTEC U.S.A)" which is commercially available. NOTE 2 The suitable socket for hight voltage terminal pins is "SS-102-T-22 (SAMTEC U.S.A)" which is commercially available. NOTE 3 The suitable socket for DY12 output terminal pins is "ASP-24307-02 (SAMTEC U.S.A)" which is commercially available.
NOTE 1
0.65
Y
ANODE OUTPUTS (P1 to P8) TERMINAL PINS ( 0.46) ; BDL-108, SAMTEC
PIN CONNECTION P1 P2 P3 P4 P5 P6 P7 P8 GND GND GND GND GND GND GND GND
X
ANODE OUTPUTS (P9 to P16) P9 P10 P11 P12 P13 P14 P15 P16 TERMINAL PINS ( 0.46) GND GND GND GND GND GND GND GND ; BDL-108, SAMTEC
H8711
R1 to R3 : 360 k R4 to R13 : 180 k R14 : 1 M R15 to R17 : 51 R18 : 10 k C1 to C4 : 0.01 F F DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
TERMINAL PINS (BDL-108, SAMTEC) P1 P2 ANODE1 OUTPUT ANODE2 OUTPUT ANODE8 OUTPUT GND GND GND
P8 P9
K
TERMINAL PINS (BDL-108, SAMTEC) ANODE9 OUTPUT GND GND GND
P15 P16 C4
ANODE15 OUTPUT ANODE16 OUTPUT
R14 R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R15 R11 C1
R16 R12 C2
R17 R13 C3
R18
TERMINAL PINS (BBL-102, SAMTEC) DY12 OUTPUT GND
TERMINAL PINS (BBL-TYPE, SAMTEC) -HV INPUT GND
TPMHA0496EA
*NOTE: DIVIDER RATIO=2:2:2:1:1...1:1:1
H8711-10
R1 to R3, R13 : 360 k R4 to R11 : 150 k R12 : 180 k R14 : 1 M R15 to R17 : 51 R18 : 10 k C1 to C4 : 0.01 F
TERMINAL PINS (BDL-108, SAMTEC) P1 P2 ANODE1 OUTPUT ANODE2 OUTPUT ANODE8 OUTPUT GND GND GND
P8 P9
K F
TERMINAL PINS (BDL-108, SAMTEC) ANODE9 OUTPUT GND GND GND
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
P15 P16 C4
ANODE15 OUTPUT ANODE16 OUTPUT
R14 R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R15 R11 C1
R16 R12 C2
R17 R13 C3
R18
TERMINAL PINS (BBL-102, SAMTEC) DY12 OUTPUT GND
TERMINAL PINS (BBL-TYPE, SAMTEC) -HV INPUT GND
TPMHA0497EA
*NOTE: DIVIDER RATIO=2.4:2.4:2.4:1:1...1:1.2:2.4
WARNING ~ High Voltage ~
The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments.
* PATENT: USA Pat. No. 5410211
PATENTE PENDING: JAPAN 11, USA 1, EUROPE 2
WEB SITE http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
TPMH1278E02 APR. 2003 IP

▲Up To Search▲

Price & Availability of H8711-10

	To Download H8711-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .